Filter
Top Products
68
Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
❖ Built-in display only
❖ Built-in display and external monitor simultaneously
❖ External monitor only
3 Release the
Fn key.
TECHNICAL NOTE: You can also change these settings using
the Display Properties Box.
Set the option for the video controller by clicking Start, then
Control Panel and clicking Display. Choose the Settings tab,
click the Advanced button, select Display Device, select the
applicable Monitor type, click Apply or OK.
For more information on switching the display output, see
“Directing the display output when you turn on the
computer” on page 67.
Adjusting the quality of the external display
To obtain the best picture quality from your television (or
other video display device), you may need to adjust the video
settings. See the video device documentation for additional
configuration steps.
TECHNICAL NOTE: In order to use one of the simultaneous
modes, you must set the resolution of the internal display
panel to match the resolution of the external display device.
The external display device must support a resolution of 640 X
480 or higher.