Filter
Top Products
User’s Manual 5-3
The Keyboard
Press FN + F10 or FN + F11 to access the computer's integrated keypad.
When activated, the keys with grey markings on their bottom edge become
either numeric keypad keys (FN + F11) or cursor control keys (FN + F10).
Please refer to the Keypad overlay section in this chapter for more
information on how to operate these keys, taking care to note that the
power on default for both settings is off.
Press FN + F12 to lock the cursor on a specific line. The power on default is
off.
Hot keys
Mute:Turns the volume on and off.
Lock: Enters "Lock computer" mode. To restore your desktop, you need to
log on again.
Power plan: Displays the power save modes and lets you change the
power settings.
Sleep: This hot key switches the system to Sleep Mode.
Hibernate:This hot key switches the system to Hibernate mode.
Output: Changes the active display device.
+
+
+
+
+
+
To use a simultaneous mode, you must set the resolution of the internal
display panel to match the resolution of the external display device.