Filter
Top Products
3. PRINTER OPERATION
EO1-33029
3.3 Installing the Printer Drivers
3- 5
3.3.2 Driver Download
(Cont.)
3.3.3 Driver Installation
7.
When you locate the file, such as Bdrv_Vx_x_Buildxx.exe, double
click on the file to begin extracting the setup program files. The screen
should appear as shown below.
8.
To extract the driver to the default directory (C:\TEC\MONO\CD)
click on the
OK
button to begin the extraction. Otherwise click on the
Reference
button to select a different directory as shown by the
screen display below.
9.
Select the desired directory to extract the files to and then press the
OK
button to begin the extraction as shown by the following screen
display. (The default directory is shown as the install directory)
Now that the TEC MONO Driver Set has been installed to your hard
disk, the driver setup program must be run to extract the driver
information files to your hard disk preparatory to your adding the B-852
printer function to your host computer.
1.
Locate the driver set that you downloaded in the previous steps. If
you used the default directory, C:\TEC\MONO\CD, go to that
directory.
2.
From that directory, run the Setup.exe program to start the Install
Shield Wizard. The screen will change to that shown below.
NOTE:
For further information about
the installation procedure for
Windows NT®, please contact
y
our authorized TOSHIBA TEC
representative.