Filter
Top Products
APPENDIX 4 SYSTEM MODE
EO1-33029
A4.5 Test Print
A4-14
A4.5 Test Print (Cont.)
While pressing the
[FEED]
and
[PAUSE]
keys at the same time, turn
on the printer. Hold both keys until the “<1>DIAG. Vx.x” Message
appears.
Press the
[FEED]
key 2 times.
The Test Print is ready to be performed.
Specifying the Print Condition for the Test Print
The print conditions for the Test Print should be specified before
printing. When “<4>TEST PRINT” appears, press the
[PAUSE]
key.
Issue Count Setting
To enter the Issue Count Setting menu, press the
[PAUSE]
key.
After selecting the issue count, press the
[PAUSE]
key to go to Print
Speed Setting.
NOTES:
• When pressing the
[FEED]
and
[RESTART]
keys at
the same time in the Test
Print menu, the message
returns to “<4>TEST
PRINT”.
• If holding the
[FEED]
or
[RESTART]
key for 0.5
seconds or longer in the
Test Print menu, the key is
entered continuously.
• The fine adjustment
parameters are effective for
the Test Print. (except for X
Axis Fine Adjustment.)
• If any error occurs, an
error message appears, and
the printer stops printing.
After clearing the errors,
press the
[PAUSE]
key to
return to the System Mode
menu. The printer does not
resume printing
automatically.
• A changed parameter
becomes enabled by
pressing the
[PAUSE]
key
and is stored in memory
until the printer is turned
off.
35,17&21',7,21
[RESTART]
[FEED]
,668(&2817
,668(&2817
,668(&2817
,668(&2817
,668(&2817
,668(&2817
,668(&2817
!',$*9[[
!7(6735,17
,668(&2817
,668(&2817
,668(&2817