Filter
Top Products
3. PRINTER OPERATION
EO1-33029
3.4 Using the B-852 Printer Properties Menus
3-26
3.4.8 Stock Tab (Cont.)
Sensor Select
• None. Used to specify that either continuous forms (labels without
gaps) are being used or that, if there are gaps or marks, they should be
ignored.
• Reflective. The reflective sensor is used to detect the marks on
continuous stock that has black marks on the back.
• Transmissive. The transmissive sensor is used to locate the gaps
between labels.
• Transmissive (Preprinted Labels). This sets the transmissive
sensor's threshold setting to work better with pre-printed label stock.
• Reflective (Manual Threshold). This allows setting the reflective
sensor's threshold on the printer itself. See the printer's documentation
for information on how to set this threshold.
Label Gap
-
This is the box for typing in the length of the gap
between
labels. This setting may be set between 2.0 and 20.0 millimeters.
Issue Mode – When the arrow on this scrolling text box is clicked on,
only one option will be available and that is batch mode with back feed
since this model printer does not use the strip module.
Cut Mode – When the arrow on the
Cut:
scrolling text box is clicked on,
the following display appears.
NOTE:
I
n
Issue Mode
, Normal print-
ing is done in Batch Mode (with
back feed).