Filter
Top Products
APPENDIX 4 SYSTEM MODE
EO1-33029
A4.5 Test Print
A4-15
A4.5 Test Print (Cont.)
Print Speed Setting
Select the print speed for the test print from 4 inches/second and 2
inches/second.
After selecting the print speed, press the
[PAUSE]
key to go to Sensor
Type Selection.
Sensor Type Selection
Select the sensor type among “TRANS” (Feed Gap Sensor), “REFLECT”
(Black Mark Sensor) and “NONE”.
After selecting the sensor type, press the
[PAUSE]
key to go to Printing
Mode Selection.
Printing Mode Selection
Select the printing mode for the test print between “TRANSFR”
(Thermal transfer) and “DIRECT” (Thermal direct).
After selecting the printing mode, press the
[PAUSE]
key to go to Issue
Mode Selection.
35,1763(('´V
35,1763(('´V
35,1763(('´V
[RESTART]
[FEED]
6(1625121(
6(16255()/(&7
[RESTART]
[FEED]
6(162575$16
3577<3(75$16)5
3577<3(',5(&7
[RESTART]
[FEED]
3577<3(75$16)5
Thermal Transfer
Thermal Direct
None
Black Mark Sensor
6(162575$16
Feed Gap Sensor
NOTE:
Select the sensor type which
applies to the media being used.
B
asically, the Reflective Sensor
(Black Mark Sensor) is for tag
p
aper, and the Transmissive
Sensor (Feed Gap Sensor) is
f
or label.
NOTE:
Select the printing mode which
applies to the desired operating
conditions.
B
asically, the Thermal Transfer
is for the use of ribbon, and the
Thermal Direct is for the use of
thermal paper.