Filter
Top Products
APPENDIX 4 SYSTEM MODE
EO1-33029
A4.4 Printer Parameter Fine Adjustment
A4- 6
A4.4 Printer Parameter
Fine Adjustment
(Cont.)
While pressing the
[FEED]
and
[PAUSE]
keys at the same time, turn
on the printer. Holder both keys until the “<1>DIAG. Vx.x” Message
appears.
Press the
[FEED]
key.
The printer is at the start of the Printer Parameter Fine Adjustment
menu.
Feed Length Fine Adjustment
With this parameter you can fine adjust the feed length. When
“<3>ADJUST SET” appears, press the
[PAUSE]
key.
[FEED]
key: Pressing the
[FEED]
key one time causes a –0.5mm
change, up to –50.0 mm.
[RESTART]
key: Pressing the
[RESTART]
key one time causes a
+0.5mm change, up to +50.0 mm.
After completing the fine adjustment, press the
[PAUSE]
key.
!',$*9[[
!$'-8676(7
NOTES:
• When pressing the
[FEED]
and
[RESTART]
keys at the
same time in the parameter
setting, the message returns
to “<3>ADJUST SET”.
• If holding the
[FEED]
or
[RESTART]
key for 0.5
seconds or longer in the
Printer Parameter Fine
Adjustment, the key is
entered continuously.
• A changed parameter
becomes enabled by pressing
the
[PAUSE]
key and is
stored in memory until the
printer is turned off.
• Use the
[FEED]
or
[RESTART]
key to select a
desired value or option.
)(('$'-PP
[RESTART]
[FEED]
)(('$'-PP
)(('$'-PP
)(('$'-PP
)(('$'-PP
)(('$'-PP
NOTE:
The fine adjustment value
equals the sum of the fine
adjustment values set by the PC
command and this parameter.
The maximum feed length fine
adjustment value is ±50.0mm.
When the value reaches the
maximum, the value remains
unchanged even if the
subsequent fine adjustment is
p
erformed.
Feed Length Fine Adjustmen
t
(Exam
p
le)