Filter
Top Products
14
Front of projector Rear of projector
30˚30˚
30˚30˚
Operate the
remote controller
within a distance
of 10 m from the
projector, pointing
the light beam at
the remote control
photo-sensor
(front or rear) of
the projector.
When operating the remote controller forwarding the
light beam to projector screen, keep the distance from
the remote controller to the projector via the screen
within about 6m. The operable range of the remote
controller, however, depends on the characteristics of
the screen.
15˚ 15˚
15˚ 15˚
15˚ 15˚
Operational range of remote controller
• Keep the remote controller photo-sensor
away from the direct sun light or fluores-
cent lamp light.
• Keep the remote controller photo-sensor
at least 2 m apart from fluorescent lamps.
Otherwise, the remote controller may
malfunction.
• If there is an inverter-operated fluores-
cent lamp near the remote controller, the
remote controller operation may become
unstable. On this occasion, stick the at-
tached protection sticker on the photo-
sensor that is closer to the fluorescent
lamp.
Vertical directions
Vertical directions (When the projector is suspended from ceiling)
PREPARATION