Toshiba TDP-MT500 Projector User Manual


 
41
The maximum resolution of this projector is 1024 x 576 dots. It is not possible to obtain more than the maxi-
mum resolution for projected images.
If picture images of a connected computer have a resolution and sync frequency other than those
indicated in the above table, they may be projected by changing the resolution and frequency within
the computer.
Because XGA60 signal and SVGA60 signal are in conformity with HTPC, they are projected with em-
phasis on picture quality, and the projected images become a little dark. The other PC input signals
are projected with emphasis on brightness.
1080i represents Hi-Vision.
COMPONENT 1,2 input does not deal with RGB signals.
DVI-ANALOG input does not deal with chrominance signals.
If signals out of specification input, they may not be projected properly.
If VGA60 signal outputs at the startup of the computer, the projected image may not be displayed properlyfor
example, the position of the displayed image may be shifted. However, this is not a failure (non-compliant
signal).
Type of connectable signals
Input signal Screen size
Signal Resolution Horizontal sync Vertical sync REAL display
representation (H x V) frequency (kHz) frequency (Hz) (H x V)
480i 15.73 59.94 720 x 480
576i 15.63 50.00 720 x 576
480p 31.47 59.94 720 x 480
576p 31.25 50.00 720 x 576
720p50 37.50 50.00 1024 x 576
720p59 44.96 59.94 1024 x 576
720p60 45.00 50.00 1024 x 576
1080i25 28.13 25.00 960 x 540
1080i29 33.72 59.94 960 x 540
1080i30 33.75 60.00 960 x 540
VGA 640 x 400 31.47 70.09 640 x 400
VGA 640 x 480 43.27 85.01 640 x 480
SVGA 800 x 600 37.88 60.32 800 x 600
SVGA 800 x 600 46.88 75.00 800 x 600
SVGA 800 x 600 53.67 85.06 800 x 600
XGA 1024 x 768 48.36 60.00 1024 x 768
XGA 1024 x 768 60.02 75.03 1024 x 768
XGA 1024 x 768 68.68 85.00 1024 x 768
SPECIFICATIONS