Filter
Top Products
18
VIEWING VIDEO IMAGES
A. Connecting the projector to video equipment
Preparations:
• Check to be sure that the power for the projector and video equipment is turned off.
1 Connect an end of a commer-
cially available video cable to
VIDEO terminal of the projector.
2 Connect the other end of the
video cable to the video output
terminal of the video equipment.
If S-video output terminal is provided with the video
equipment, make the connection as follows:
3 Connect an end of a commer-
cially available S-video cable to
the S-VIDEO terminal of the pro-
jector.
4 Connect the other end of the S-
video cable to the S-video out-
put terminal of the video equip-
ment.
• Also, read the instruction manual of the video equipment to be connected.
• No speaker for audio output is stored in this projector. To reproduce audio signals, connect audio equipment.
• Consult the delivery agent of this projector on the detailed connections, as needed.
Connecting to DVD players
When connecting this projector to a video equipment that has component video output terminals, such as
DVD players, connect video cables to COMPONENT (1 or 2) terminals.
• Playback picture images of some of DVD players may not be able to be properly projected on screen.
S-video cable
3
To S-VIDEO terminal
Video player, or the like.
To S-video output terminal
4
COMPONENT1
DVI
COMPONENT2
S-VIDEO
VIDEO
RS-232C
Y Cb/Pb Cr/Pr
Video cable
1
To VIDEO terminal
Video player, or the like.
To video output terminal
2
COMPONENT1
DVI
COMPONENT2
S-VIDEO
VIDEO
RS-232C
Y Cb/Pb Cr/Pr
COMPONENT1
DVI
COMPONENT2
S-VIDEO
VIDEO
RS-232C
Y Cb/Pb Cr/Pr
C
B
(P
B
)
Y
C
R
(P
R
)
DVD player or
BS digital tuner
Video cables
(Commercially available)
To audio output
terminals
To audio input
terminals
To COMPONENT
(1 or 2) terminals