Toshiba TDP-MT500 Projector User Manual


 
19
DVD player or BS digital
tuner that has D-terminal
D-RCA conversion cable
(Commercially available)
To audio output
terminal
To D-terminal
To audio input
terminal
COMPONENT1
DVI
COMPONENT2
S-VIDEO
VIDEO
RS-232C
Y Cb/Pb Cr/Pr
To COMPONENT
(1 or 2) terminals
Video equipment that
has DVI-D terminal
DVI cable (commercially available)
To DVI-D terminal
To DVI-D terminal
To DVI terminal
To DVI-D terminal
COMPONENT1
DVI
COMPONENT2
S-VIDEO
VIDEO
RS-232C
Y Cb/Pb Cr/Pr
Connecting DVD players or BS digital tuners that have D-terminal
When connecting this projector to a DVD player or BS digital tuner that has D-terminal, connect a
commercially available D-RCA conversion cable to COMPONENT (1 or 2) terminal.
Playback picture images of some of DVD players may not be able to be properly projected on screen.
Connecting to video equipment that has DVI-D terminal
The DVI terminal of this projector makes it possible to project high-quality video images on screen by
connecting with a video equipment that has DVI-D terminal. Also, because this projector is in conformity
with HDCP, it is possible to receive digital image signals encrypted from BS tuner outputs or DVD player
outputs.
Connect to DVI terminal with a commercially available DVI cable.
Select DVI-DIGITAL for switching input signals.
This projector is in compliance with only RGB signals, not with chrominance signals.
HDCP (High-band with Digital Content Protection) is one of encryption formats of digital image signals,
which has been developed by Intel Corporation to protect digital contents.
VIEWING VIDEO IMAGES