Filter
Top Products
21
VIEWING VIDEO IMAGES
C. Making projection
Preparations:
• Remove the lens cap.
• Turn on power for the connected video equipment.
1 Turn “ON” the main power switch (Turn to
indication I).
• When the main power switch is
turned on, POWER indicator comes
on in orange.
• If the projector finished operation without sufficient cooling,
the following operation of the main power button may not work
during the time when the cooling fan is turning. (At this time
POWER indicator blinks in orange.) After the fan has stopped
turning, press the power button again to turn on the indicator
in orange.
2 Press POWER ( ) button.
• It may take about one minute for the lamp to come on.
• On rare occasions, the lamp may fail to come on. At this time, turn
on the lamp again after a few minutes.
3 Select an input signal.
• Press one of SOURCE buttons (VIDEO, S-VIDEO, COMPONENT
1, COMPONENT 2, DVI-DIGITAL, or DVI-ANALOG button) ac-
cording to the connected input terminal.
• Select the input signal after video image is projected on the screen.
• With this projector, the input signal is selected from the input sig-
nal sources contained in the signal setting menu. (See Page 26
for the details.)
• Some projected picture images may be made easy to see by chang-
ing ASPECT (image angle). (See Page 20 for the details.)
4 Set the projector after adjusting the projec-
tion distance to obtain specified image frame
size.
5 Set the projector and screen so that they
may face perpendicular to each other. (See
Page 11.)
• If the projector and the screen can not be made perpendicular to
each other, adjust the projection angle. (See Page 11.)
6. Adjust size of the projected image by turn-
ing the zoom ring.
• It is possible to change image size by varying the distance from
the projector to the screen.
7. Adjust focus by turning the focus ring.
ENTER
WIDETELE
LAMP
TEMP
MENU/EXIT
POWER
Main power switch
POWER button
SOURCE button
POWER button /
POWER indicator
Focus ring
Zoom ring
POWER ON/OFF
C1
C2
DVI
D
DVI
A
S
V
COMP1 COMP2
DVI-D
DVI-AVIDEOS-VIDEO
16:9
16:9
4:3
4:3
ZOOM
ZM
REAL
REAL
DYN
DYNAMIC
1
2
3
ENTER
EXIT
MENU
CONTRAST
BRIGHT COLOR TINT
COLOR
TEMP
GAMMA
SHARPNESS
LIGHT
LIGHT
SHGAM
TEM
TIN
COL
BRICNT
SOURCE
ASPECT
Lighting in orange
ENTER
LAMP
TEMP
MENU/EXIT
POWER
Blinking in green
Lighting in green
Power can not be
turned “ON” or “OFF”.
ENTER
LAMP
TEMP
MENU/EXIT
POWER
ENTER
LAMP
TEMP
MENU/EXIT
POWER