Filter
Top Products
7
21. Do not leave thermal-paper
documents or easily deformed
items on top of the unit or near
the air exhaust.
The heat from the unit could erase the
information on the thermal paper, or
cause deformation or warping.
Also, when you touch a metal object put
near the air exhaust, a burn may be
caused.
22. Unplug the power plug after
the projector is finished to
use.
Turn off POWER button to bring the pro-
jector into its standby state with the light-
source lamp off. Then, wait about 2 min-
utes and turn off the main power switch,
and be sure to unplug the power plug
for safety.Wait about 2 minutes in
standby state, because during this time
the intake/exhaust fan is operating to
cool down the light-source lamp. Turn-
ing off the main power switch or unplug-
ging the power plug immediately
after use may bring the projector into
failure.
IMPORTANT SAFETY INSTRUCTIONS