Filter
Top Products
23
VIEWING VIDEO IMAGES
On setting ASPECT (Image angle)
This projector can change ASPECT ratio (The ratio between width and length of image frame) according
to input video signals.
POWER ON/OFF
C1
C2
DVI
D
DVI
A
S
V
COMP1 COMP2
DVI-D
DVI-AVIDEOS-VIDEO
16:9
16:9
4:3
4:3
ZOOM
ZM
REAL
REAL
DYN
DYNAMIC
1
2
3
ASPECT button
SOURCE
ASPECT
Original video
image
Projects video
images on full
screen (16: 9).
Projects video
images at a
ratio of 4: 3.
Projects video
images of
input signals
as they are.
Projects 4-to-3
signals by
expanding them
to 16-to-9 images
on full screen
(Nonlinear).
Projects video
images of
cinemascope
and vista size
together with the
caption.
*or
( ): name of remote controller button
Bold frames are recommended modes.
* In zoom mode, it is possible to switch between display sizes (cinemascope/vista) with ZOOM button.
In cinemascope mode, it is possible to shift the display position with {, } buttons.
16 : 9
4 : 3
ZOOM
REAL
DYNAMIC
Picture images
with a ratio of 4: 3
(480i, 576i, 480p,
576p, and PC)
Cinemascope
and vista signals
with a ratio of 4: 3
Projected images
expand in
horizontal direction.
PC inputs not less
than SVGA are
projected on full
screen (16: 9).
Squeezed 4-to-
3 images
(480i, 576i,
480p, 576p)
16-to-9 images
(1080i)
16-to-9 images
(720p)
Projected images
are compressed to
the full screen size.
Horizontal and
vertical size of the
projected images are
reduced to a half.
DISPLAY...
4:3
ZOOM
DYNAMIC
REAL
16:9
ASPECT
How to change the settings:
With the remote controller:
1. Press an ASPECT button (16: 9, 4 : 3, ZOOM, or DYNAMIC).
With the operation panel of the projector.
(Refer to Page 25 for the method of setting the menu.)
1. Reveal the signal setting menu.
2. Select “Image angle” by pressing {, } buttons.
3. Press ENTER button.
4. Select a desired image angle by pressing {, } buttons.
5. Press ENTER button.
When canceling the menu:
6. Press MENU button.