TP-Link TL-SG3109 Switch User Manual


  Open as PDF
of 120
 
18
19
To view Flash memory logs:
1. Click System > System Info > Syslog > Flash. The Syslog Flash Page opens:
Figure 21: Syslog Flash Page
The Syslog Flash Page contains the following information:
Log Index — Lists the log index number.
Log Time — Lists the date and time that the log was
entered.
Severity — Lists the severity of the event for which the
log was created in Flash memory.
Description — Lists the event description.
2. To remove current Flash memory logs, click .
3. Click . Logs are removed from the table.
4.4 Dening System Log Servers
The Syslog Servers Page contains information for viewing and conguring the remote log servers. New log servers can be
dened, and the log severity sent to each server.
To dene Syslog servers:
1. Click System > System Info > Syslog > Servers. The Syslog Servers Page opens:
Figure 22: Syslog Servers Page
The Syslog Servers Page list the server parameters and
contains the following elds:
Server — Specifies the server to which logs can be
sent.
UDP Port — Denes the UDP port to which the server
logs are sent. The possible range is 1 - 65535. The
default value is 514.
Port-Facility — Denes an application from which system logs are sent to the remote server. Only one facility can be
assigned to a single server. If a second facility level is assigned, the rst facility is overridden. All applications dened for a
device utilize the same facility on a server. The eld default is Local 7. The possible eld values are Local 0 - Local 7.
Description — Provides a user-dened server description.
Minimum Severity — Indicates the minimum severity from which logs are sent to the server. For example, if Notice is
selected, all logs with a severity level of Notice and higher are sent to the remote server.
Remove — Deletes the currently selected server from the Servers list. The possible eld values are:
– Checked — Removes the selected server from the Syslog Properties Page. Once removed, logs are no longer sent to
the removed server.
– Unchecked — Maintains the remote servers.
2. Click . The Add Syslog Server Page opens.
 previous next