TP-Link TL-SG3109 Switch User Manual


  Open as PDF
of 120
 
86
87
13.1.2 Firmware Download
The Firmware Download section contains the following elds:
TFTP Server IP Address — Species the address of the TFTP server from which les are downloaded.
Source File Name — Species the le to be downloaded.
Destination File — Species the destination le to which system le is downloaded. The possible eld values are:
– Software Image — Downloads the Image le.
– Boot Code — Downloads the Boot le.
Download to Master Only — Downloads the system le only to the Master.
Download to All Units — Downloads the system le to all units.
13.1.3 Conguration Download
The Conguration Download section contains the following elds:
TFTP Server IP Address — Species the address of the TFTP server from which the conguration les are downloaded.
Source File Name — Species the conguration les to be downloaded.
Destination File — Species the destination le to which the conguration le is downloaded. The possible eld values
are:
– Running Conguration — Downloads commands into the Running Conguration le.
– Startup Conguration — Downloads the Startup Conguration le, and overwrites the old Startup Conguration le.
2. Open the File Download Page.
3. Select the download type.
4. Dene the TFTP server address.
5. Dene the Source File Name and Destination File elds.
6. Click . The requested les are downloaded to the specied destination.
13.2 Uploading System Files
The Copy Files Page contains elds for uploading the software from the device to the TFTP server.
To upload system les:
1. Click System > Maintenance > File Management > File Upload. The File Upload Page opens:
Figure 124: File Upload Page
The File Upload Page is divided into the following sections:
Upload Type
Software Image Upload
Conguration Upload
13.2.1 Upload Type
The Upload Type section contains the following elds:
Firmware Upload — Species that the software image
file is uploaded. If Firmware Upload is selected, the
Conguration Upload elds are grayed out.
Configuration Upload — Specifies that the Configuration file is uploaded. If Configuration Upload is selected, the
Software Image Upload elds are grayed out.
 previous next