TP-Link TL-SG3109 Switch User Manual


 
42
43
eld values are:
Dynamic — The IP address is dynamically created.
Static — The IP address is a static IP address.
Remove — Removes DNS servers. The possible eld values are:
Checked — Removes the selected DNS server
Unchecked — Maintains the current DNS server list.
DNS Server — Displays the DNS server IP address. DNS servers are added in the Add DNS Server Page.
Active Server — Species the DNS server that is currently active. The possible eld values are:
Selected — Activates the selected DNS server after the device is reset.
Unselected — Deactivates the selected DNS server after the device is reset. This is the default value.
2. Click the Enable DNS checkbox.
3. Dene the Default Domain Name.
4. Click . The Add DNS Server Page opens:
Figure 62: Add DNS Server Page
5. Enter the DNS Server name and click Set DNS Server
Active.
6. Click . The new server is added, and device
information is updated.
6.2.2 Conguring Host Mapping
The DNS Host Mapping Page provides information for dening DNS Host Mapping.
To dene DNS host mapping:
1. Click System > System Info > IP Conguration > Domain Name System > Host Mapping. The Host Mapping Page
opens:
Figure 63: Host Mapping Page
The Host Mapping Page contains the following elds:
Host Names — Displays a user-defined default
domain name. When dened, the default domain name
is applied to all unqualified host names. The Host
Name eld can contain up to 158 characters.
IP Address — Displays the DNS host IP address.
Remove — Removes default domain names. The
possible eld values are:
Checked — Removes the selected DNS host.
Unchecked — Maintains the current DNS host mapping list.
2. Click . The Add DNS Host Page opens: