Filter
Top Products
34
Gigabit Uplink Web Smart Switch
Storm ControlFigure 6-25
Broadcast Control:
¾
Enable or disable the broadcast control to limit the broadcast
frames.
Multicast Control:
¾
Enable or disable the multicast control to limit the multicast
frames. Enabling multicast control will also enable broadcast control.
UL Control:
¾
Enable or disable the UL control to limit the UL packets. Enabling UL
control will also enable broadcast control and multicast control.
Limit Rate:
¾
Indicates the maximum rate (kilobytes per second) at which the
controlled packets configured above are forwarded. For the 1000Mbps port, if set
the value of 64Kbps, the actual value is about 70Kbps.
Note:
Parameters of Trunk member ports display the parameters of the Trunk
they belong to and it cannot be configured here (see port 5 and 6 in Figure 6-25
for example). You can configure parameters of the Trunk in the “Port Trunking”
page.
This page configures the description to indicate the ports.
Input description words in the Description filed for each port. Notice that at most 15
letters or numbers can be held in each field.
Port DescriptionFigure 6-26
Web Management