Filter
Top Products
37
Gigabit Uplink Web Smart Switch
There is enough space in static MAC address table.
The static MAC address table is divided into several pages. At most 10 entries can be
held in one page. The buttons “First”, “Previous” and “Next” can be used to browse the
whole table.
Note:
The capacity of the static MAC address is shown in “Appendix C”.
If an incorrect port number is selected when adding an entry, or the port number
is modified unexpectedly later, then the entries must be renewed; otherwise, the
packets cannot be forwarded correctly.
If a device, whose MAC address is added to static MAC address table, is connected
to a wrong switch port (not the port configured in static MAC address entry), all the
packets routing to the device cannot reach the device.
A MAC address cannot be added to static MAC address table and filtering MAC
address table simultaneously.
All the packets taking the filtering MAC address as their destination are discarded by
the switch no matter which port they enter from.
This page provides the function of adding, searching a filtering MAC address and
changing the entry state. The filtering MAC address entry is applicable to all switch
ports. The operating instruments, which are similar to “Static MAC Address”, are
omitted here.
Filtering MAC AddressFigure 6-31
Index:
¾
Indicates the entry index of filtering MAC address table.
MAC Address:
¾
Indicates the filtering MAC address to be configured or to be
searched.
State:
¾
Indicates whether the entry is in enabled state or not.
Note:
The capacity of filtering MAC address table is shown in “Appendix C”.
Web Management