Filter
Top Products
35
Gigabit Uplink Web Smart Switch
This page contains the following topics: switch IP address, static MAC address, filtering
MAC address, dynamic binding, bound MAC address, aging time and ping.
This page is shown as below:
Switch IP AddressFigure 6-27
MAC Address
¾
: Is firmed into switch in the manufacturing process; it is sole and
unchangeable.
DHCP Client
¾
: Indicates whether the DHCP function is enabled. If DHCP client is
enabled, the switch will obtain the IP address, netmask and default gateway from
the DHCP server automatically; otherwise, these three items should be configured
manually.
IP Address
¾
: Is necessary for switch management. The configuration of switch IP
address must be compliant with the subnet layout.
Default Gateway
¾
: Serves as the default destination when a packet whose
destination IP address is not within the switch’s subnet is to be forwarded.
Note:
When DHCP client is enabled, the IP parameters are obtained automatically from
the DHCP server, so the “IP Address”, “Netmask” and “Default Gateway” fields are
disabled. These parameters can be queried on the DHCP server.
The initial state of DHCP client is disabled and the initial IP address is 192.168.0.1.
This page provides the function of adding, searching a static MAC address and
changing the entry state, as shown in Figure 6-28.
Web Management