Filter
Top Products
39
Gigabit Uplink Web Smart Switch
State
¾
: Indicates the switch port state that may be binding, free port, secure port,
unplugged or "--". The details are shown below:
Free Port:
The binding function is disabled, and the port can learn MAC address
freely.
Binding:
The port is in binding state, and its bound MAC address number is still
less than the max number.
Secure Port:
The port has already bound the max number of MAC address in
dynamic binding mode, or it was set to secure port manually in "Port Parameter"
page.
Unplugged:
The port is a SFP port and unplugged. The dynamic binding
function cannot be configured now.
--:
The port is a trunk member and its binding function cannot be configured.
Further explanation:
If the port is set to secure port manually in "Port Parameter " page, the dynamic
binding cannot be configured here. If the port with dynamic binding enabled transfers
into secure state automatically because the port has bound the specified number
MAC address, the dynamic binding function of the port can be enabled or disabled
again.
The combo box in "All Ports " entry is used to change the selections of corresponding
combo boxes of all ports simultaneously.
A "Refresh" button is provided to look up the latest number of bound MAC address.
Note:
If the switch port is a trunk member or an unplugged SFP port, the binding
function of the port cannot be configured here.
This page is shown below:
Bound MAC AddressFigure 6-33
Index
¾
: Indicates the entry index in dynamic binding MAC address table.
MAC Address
¾
: Indicates MAC addresses already bound to the switch ports.
Port
¾
: Indicates the switch port number corresponding to the bound MAC address.
Web Management