Filter
Top Products
TVP-221H User’s Guide
4
Chapter 4
Configuring TVP-221H from
a Web Browser
This chapter explains procedures for configuring the TVP-221H from a web browser.
4.1 HTTP setting mode
This section describes the processes for setting up the VoIP Gateway once it has been
installed. Java enabled browsers including Microsoft Explorer version 4 or higher, or
Navigator version 4.5 or higher can be used in this section to view and change
parameters.
PC Setup
In order to configure the TVP-221H, the Terminal PC needs to have TCP/IP protocol
and a compatible IP Address.
1. Connect the TVP-221H to the network with a RJ-45 UTP cable. Power it on.
2. To configure a PC under Windows 95/98, select the Network Neighborhood icon
on the desktop, then select Properties. You will see a screen like below:
3. If a line like the one highlighted ("TCP/IP -> Network Card”) is not listed , select
Add-Protocol-Microsoft-TCP/IP-OK to add it.
4. Select Properties for the “TCP / IP -> Network card” entry. You will see a screen
like the following:
20