Filter
Top Products
TVP-221H User’s Guide
Enter the default "User Name" and the "Password" you set on the Administration Password
Setup screen above.
Remote Administration
Remote Administration allows you to connect to this interface via the Internet, using your Web
browser or Telnet. By default, both services are activated.
Data – Telnet Access Screen
Information
Information
To establish a connection from the Internet using Telnet:
1. Enable the Telnet Server.
2. From Windows command prompt
3. Enter “telnet 192.168.0.1”
4. Enter Username “admin”
5. Enter “123”
Settings
Telnet
Check this to allow Telnet administration/management via the
Internet. (To connect, see above).
If Disabled, this device will ignore management connection attempts
40