Filter
Top Products
34 • ADVANCED CALLING
Wait for response
+ +
Use the wait for response feature when the other person tells you
to hold. The Superprint 4425 will flash the ring flasher when the
other person starts typing again. Follow these steps to turn on
wait for response:
1. When the other person types, “Hold please,” or something
similar, hold down the and keys and press the key
( + + ). The display says WAITING.
2. When you see the ring flasher flashing, the other person is
typing. Continue your conversation. The ring flasher will stop
when you start typing.
Using the re l ay voice announcer
+
The relay voice announcer is a recording that tells a hearing
person you are answering with a TTY and that the call should go
through a relay service.
When the signal light flickers, telling you that someone is
speaking instead of typing,
press + to turn on the relay voice announcer.
A woman’s voice repeats “Please use text telephone or dial relay.”
You will see the message on the display at the same time. The
message stops when someone starts typing.
The relay voice announcer is programmable. It will tell the caller
what number to dial if you type in your relay service’s telephone
number by following the instructions on the next page.
VCtrl
VCtrl
WShiftCtrl
WShiftCtrl
WShiftCtrl