Filter
Top Products
Changing ASCII seek time +
This option sets the length of time during which the Superprint
4425 sends out an ASCII seek tone. The normal TTY seek time is
three seconds. You may need more time if you often connect to
computers. Six seconds is recommended. Follow these steps to
change the setting:
1. Press the options key ( + ). You will see PRINT
(UP/LOW) CASE on the display.
2. Press the key until you see ASCII SEEK TIME (3) on the
display.
3. Type a number to change the setting to 0 or any number of
seconds between 2 and 9.
4. Press the key to leave options.
Note: Selecting zero will turn off ASCII code and your Superprint
4425 will not try to use it even if the other TTY is using ASCII
code.
Making an ASCII call
An ASCII conversation begins when your TTY’s code option is set
to ASCII originate, and the person you call answers in ASCII code.
If you are having problems connecting in ASCII code, see Turning
on ASCII code and changing options on page 81 or Changing
ASCII seek time on page 82 for more information.
Answering an ASCII call
When the code setting is automatic and someone calls using ASCII
code, your Superprint 4425 answers in ASCII code. If it cannot
make an ASCII connection, it changes to Baudot.
Esc
Return
9Ctrl
9Ctrl
82 • CODES