Ultratec 4425 Printer User Manual


 
4 • SAFETY INSTRUCTIONS
Important safety instructions
When using your Superprint 4425, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and
injury to persons.
1. Read and understand all instructions.
2. Follow all warnings and instructions on the Superprint 4425.
3. Unplug the Superprint 4425 from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners. Use a damp
cloth for cleaning.
4. Do not use the Superprint 4425 near water, for example, near
a bath tub, wash bowl, kitchen sink, laundry tub, in a wet
basement, or near a swimming pool.
5. Do not place the Superprint 4425 on an unstable cart, stand,
or table. The Superprint 4425 may fall, causing serious damage
to the Superprint 4425.
6. The Superprint 4425 should be operated only from the type of
power source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult your
dealer or local power company.
7. Do not allow anything to rest on the power cord. Do not
locate the Superprint 4425 where people can walk on the
cord.
8. Do not overload wall outlets and extension cords. This over-
loading can result in a fire or electric shock.
9. To reduce the risk of electric shock, do not disassemble the
Superprint 4425, but take it to a qualified service person when
service or repair work is required. Opening or removing
covers may expose you to dangerous voltages or other risks.
Incorrect re-assembly can cause electric shock when the
Superprint 4425 is subsequently used.
10. Avoid using a telephone (other than a cordless type) during an
electrical storm. There is a remote risk of electric shock from
lightning.