Filter
Top Products
RELAY DIAL WITH E-TURBO
This section is for people whose Telecommunications Relay Service (TRS) supports
E–Turbo technology. Please refer to the next section, “Relay Dial (without E-Turbo),” if
E–Turbo is not available in your area.
28 • CHAPTER TITLE
E-Turbo calls are more streamlined.
If your relay service is E-Turbo compatible, you can take advantage of the
most streamlined way to call through relay. With E-Turbo, many of the
details of a relay call are automatically handled for you:
1. You dial the phone number of the person you are calling. Your
Superprint Pro80 automatically connects to your TRS.
2. There is no need to interact with the Communications Assistant (CA).
3. Your preferences are automatically sent to the TRS, such as your
preference for a male or female CA or which long distance carrier to use.
Turning E-Turbo On
1. Press . CODE < AUTOMATIC> is displayed.
2. Press until E-TURBO is displayed.
3. Press the to select <ON>.
4. Press . **E-TURBO ON** is displayed briefly.
5. Press to exit the Options menu.
Programming the E-Turbo Relay Phone Number
1. Check with your TRS for the best number to use for E-Turbo calls.
2. Turn on the Superprint Pro80 LVD.
3. Hold down the key and press . RELAY NUMBER> is displayed.
4. Type the access number of your TRS. There is space for up to 20 characters. Use
the key to correct mistakes.
5. Press . ** RELAY NUMBER SAVED ** is displayed briefly.
Then, USER PREF is displayed.
6. Type the letter(s) of the relevant setting from the following chart.
Enter
Back Space
RelayProgram
Esc
Enter
Spacebar
Options