Filter
Top Products
3. To pause at any time while reviewing messages, press the . Then press the
again to continue reviewing the messages.
4. To stop reading messages, press . CLEAR MSGS <NO> is displayed. Go to
step 7.
5. When finished, the Superprint Pro80 LVD displays, <END OF MESSAGES>.
6. Press . CLEAR MSGS <NO> is displayed.
7. To clear messages, press to change the setting to <YES>. Then, press
. MESSAGES CLEARED is displayed.
Enter
Spacebar
Esc
Esc
Spacebar
Spacebar
USING AUTO-ANSWER• 39
EDITING THE OUTGOING MESSAGE
1. Hold down the key and press . AA RINGS <2> is displayed.
2. Press until CHANGE GREETING <NO> is displayed.
3. Press the to change the option to <YES>. Then, press .
ANSWER> YOU HAVE RE is displayed.
4. Edit the message as needed.
You can use the keys to move around in the message, the key to
delete parts of the message and the button to delete the whole message and
start over.
5. Press to save this message and exit this menu. ** MEMO SAVED ** is
displayed.
SETTING THE NUMBER OF RINGS
What does Toll Saver do?
Toll Saver saves you the cost of a call when checking your Auto-Answer
messages remotely. You can tell if you have any new messages because
Auto-Answer picks up the call after two rings. If you do not have new
messages, Auto-Answer waits for five rings. So, you can hang up after
three rings without being charged for the call.
Enter
Clear
Back Space
EnterSpacebar
Auto-AnswerProgram
Can I print all of the Auto-Answer Messages at once?
Hold down the key and press . Press to scroll down.
The last five options allow you to print all the items of a particular type
(see “The Printer Button” on page 54).
PrinterProgram