9
Feature Highlights
• Trunk Tracking – Follow VHF High Band UHF 800/900MHz trunked public safety and
public service systems just as if conventional two-way communications were used.
• Digital Capable – With the APCO 25 Digital card (BCi25D) installed, you can monitor
supported project 25 systems.
• Multi-Track – Track more than one trunking system at a time. Scan conventional and
trunked systems at the same time.
• 1000 Channels – Program one frequency into each channel. You must have at least one
channel programmed to use the Scan mode.
• 27 Bands – Includes 27 bands, with aircraft and 800 MHz.
• 10 Banks – 10 banks with 100 channels each are useful for storing similar frequencies to
maintain faster scanning cycles or for storing all the frequencies of a trunked system.
• 25 MHz-1300 MHz – Indicates the range of frequencies that can be searched within the
bands of your scanner.
Note: The frequency coverage is not continuous and excludes the cellular band,
512-806MHz.
• 10 Priority Channels – You can assign one priority channel in each bank. Assigning a
priority channel allows you to keep track of activity on your most important channel(s)
while monitoring other channels for transmissions. You can also assign trunking priority
talkgroups.
• Priority Plus Scan – Allows you to scan only priority channels.
• Preprogrammed Service – Allows you to toggle through preprogrammed public safety,
news media, TV broadcast audio, Ham, CB, FRS, special low power, railroad, aircraft,
marine, racing, and weather frequencies.
• Unique Data Skip – Allows your scanner to skip unwanted data transmissions and
reduces birdies.
• Memory Backup – If power is disconnected, the frequencies programmed in your scanner
are retained in memory.
• Direct Channel Access – Go directly to any channel without entering the Menu mode.
• Attenuator – Reduces the signal strength on a per frequency basis.
• PC Programmable – Allows you to easily program all frequencies and Trunking Talk
Groups into your BC785D through Uniden E-Scanner software running on your PC.
– For more information on E-Scanner Programming software visit our website at
scanner.uniden.com.
• Turbo Search – Increases the search speed to 300 steps per second. This applies only to
transmission bands with 5 kHz steps.
• Text Tags – You can customize your scanner by storing text tags (up to 16 characters).
• Auto Store – The scanner automatically stores found active frequencies into an assigned
bank.
• CTCSS/DCS – The scanner can receive and search for subaudible tones.
• NWR-SAME Alert – The scanner is compatible with warning siren and message
transmissions.
• FIPS Code – Six digit FIPS Code (emergency and geographic area code) programmable.
BC785D 11/8/2 1:01 PM Page 9