Filter
Top Products
Menu Description and Numeric Keypad Equivalents
Below are the Menu screens and a brief description or purpose of the feature.
1:SERVICE OPTION
Service Search menus are preprogrammed services used around the U.S.
1:WEATHER
1:MONITOR
When you select this mode, the preprogrammed NOAA weather channel
begins to activate.
2:ALERT
You can set NWR-SAME weather alert to 1:ON or 2:OFF. With ALERT
ON you can enter the mode to program your FIPS code.
2:PUBLIC SAFETY
3:NEWS
4:TV BROADCAST
5:HAM RADIO
6:MARINE
7:RAILROAD
8:AIR
9:CB RADIO
0:FRS
:RACING
:SPECIAL
:CHAIN SEARCH
You can program up to 10 search ranges. The first time you program a range you
will need to do so through the Menu. After the first time you can program a range
as you do on most any other scanner, using the numeric keypad, ▲, ▼ VFO
control. Use this Menu item to select the search range that you want to program.
You can program range 1 through 10, one at a time. For each of the ranges, the
following options can be modified.
1:CHAIN SEARCH
You must turn Chain Search feature ON, in order to use the Chain Search
feature.
2:SEARCH RANGE
1:RANGE
Enter the upper and lower frequency limits of the Search Range.
2:STEPS
You can assign a variety of step sizes to the search range.
Note: The default step is usually acceptable and is listed on page 1.
3:MODE
You can change the Auto receive mode to AM, FM, WFM and NFM.
19
BC785D 11/8/2 1:01 PM Page 19