Filter
Top Products
To enter a Type 2 Talk Group ID:
1. Enter the ID you want to store.
2. Press E.
To enter a Type 1 ID:
For a Type I ID, the block number, Fleet number and Subfleet
number make up the Talk Group ID number. Please see page
87.
1. Enter the ID you want to store (ID = Block number + Fleet
number + (decimal key) + Subfleet number).
2. Press E.
To enter an EDACS
®
ID:
1. Enter the ID you want to store.
Use the (decimal key) for the "dash".
2. Press E.
Hint: Remember that Uniden's AFS format allows you to enter full or partial EDACS IDs for
powerful flexibility in all modes. Be sure to read the section "EDACS Reception" on
page 58 to learn how this works.
Note: The BC785D default to "AFS" talkgroup displays for EDACS
®
only.
To enter a LTR ID:
For a LTR ID, the Area Code, Home Repeater number and ID
make up the Talk Group ID. Please see page 62 for more
information.
1. Enter the Area Code and then press (decimal key)
2. Enter the Home Repeater number and then press (decimal key).
3. Enter the ID you want to store
4. Press E.
Note: To clear a stored ID while entering an ID, press 0 and E successively, and start over.
☞ Remember! You can also use ▲ or ▼ instead of rotating the VFO.
Also instead of pressing E, you can press the VFO control.
Assigning a Text Tag to a Talk Group ID
1. Press MENU.
2. Select 2:SCAN OPTION / 2:TRUNK by rotating the VFO and pressing E.
3. Select the bank number by rotating the VFO and pressing E. You can also enter the
Bank number by using the keypad.
.
.
.
.
49
M5-0
4128
1216
¡
ENTER ID
M5-0
------
050-2
¡
ENTER ID
E5-0
------
09-022
¡
ENTER ID
L5-0
------
0-02-120
¡
ENTER ID
BC785D 11/8/2 1:01 PM Page 49