Uniden BC785D Scanner User Manual


 
4:ALPHA TAG
You can enter an Alpha Tag for any or all of the search ranges.
5:TRUNK
During Chain Search mode, when the scanner finds an active
frequency, the trunk tracking system will be active. Four frequency
plans apply to the Control Channel Only feature (for details see
page 66).
3:DELAY
Set the delay for the search ranges. This applies to Search mode, and
Service Search mode. The delay time for Service Search mode can be
changed. (See 2:SCAN OPTION / 1:CONVENTIONAL / 2:DELAY
for details).
4:ATTENUATOR
Set attenuation for all search ranges.
(See 2:SCAN OPTION / 1:CONVENTIONAL/ 5:ATTENUATOR for
details).
5:TONE DATA
The default mode is OFF. This means that you will receive all transmissions
on any frequencies that are active within your search range(s). By selecting
CTCSS or DCS you can set the radio to receive only a particular subaudible
tone to be received during your search. You can also lockout a particular
CTCSS or DCS tone. You may wish to do this if you want to search a range
but not hear transmissions on any frequency that has a particular
subaudible tone.
Note: Through the System Menu you can set the radio to operate in Tone
Search mode during Search as well. In this mode, the radio will
automatically determine the active subaudible tone on any frequency
received during the search.
Set a delay for the search ranges. This applies to all ranges (See
CHANNEL DATA-STEPS for details).
6:RECORD
With Record set to on, any frequency that is active, during the search, can
be recorded to an external tape recorder.
7:AUTO STORE
You can automatically store active frequencies found during a search into
the memory. You can select which bank you want to program the found
frequencies. The audio will be muted during Auto Store.
2:SCAN OPTION
1:CONVENTIONAL
Choose the channel number. The following options are available for the selected
channel only. Repeat using a different channel number, if necessary.
1:FREQUENCY.
Allows you to edit or enter a frequency in each channel you select.
Also you can set an alphanumeric text tag for each programmed frequency.
20
BC785D 11/8/2 1:01 PM Page 20