Filter
Top Products
71
4. Once you have adjusted the Sound Quality to the lowest possible level, press the E
key.
Press the RSM key to exit the Sound Quality Adjustment Mode.
* To cancel the adjusted threshold level, press (Decimal) key.
* The adjusted threshold level for the current frequency can be set back to the default
value by pressing and holding the (Decimal) key.
* When you change the Sound Quality it affects all other APCO P-25 signals in that
same band. (UHF, VHF, or 800MHz)
* You cannot enter the “Sound Quality Fine Tuning” mode when the scanner is
operating as follows:
1) The receiving frequency is 0 MHz.
2) Air Band Frequency
3) BCi25D card is not inserted
4) BCi25D / P-25 monitoring is disabled
.
.
BC785D 11/8/2 1:01 PM Page 71