Filter
Top Products
76
Additional Features
The following additional features are designed for you to customize your scanner. Once
these features have been turned ON or OFF, they will remain as they are set until you reset
them, even if you turn the scanner OFF and then ON again.
Dimmer
To change brightness of the display:
1. Press MENU.
2. Select 3:SYSTEM OPTION / 1:DIMMER by rotating the VFO and pressing E.
3. Select one from 1:HIGH, 2:MEDIUM or 3:OFF by rotating the VFO and pressing E.
Enter Lock
You can lockout the keypad to prevent re-programming of channels, talkgroups and tones
(see page 82).
1. Press MENU.
2. Select 3:SYSTEM OPTION / 4:ENTER LOCK by rotating the VFO and pressing
E.
3. Select 1:ON by rotating the VFO and pressing E.
Key Beep Option
To choose key beep sound 1:ON or 2:OFF:
1. Press MENU.
2. Select 3:SYSTEM OPTION / 3:KEY BEEP by rotating the VFO and pressing E.
3. Select 1:ON or 2:OFF by rotating the VFO and pressing E.
Screen Mask
The trunk, frequency, receiving mode, and signal meter indications on the display are
masked when this feature is activated (except while in Search mode). This feature reduces
the amount of displayed information.
Note: While Screen Mask is ON, Enter Lock is active.
1. Press MENU.
2. Select 3:SYSTEM OPTION / 2:SCREEN MASK by rotating the VFO and pressing
E.
3. Select 1:ON or 2:OFF by rotating the VFO and then press E.
Note: With SCREEN MASK on, press the VFO, then SCREEN MASK will be off.
BC785D 11/8/2 1:01 PM Page 76