Filter
Top Products
CONTROLS AND FEATURES
15
12. PC 16x9 BUTTON
Use this button to select 16x9 aspect ratio for computer signal.
13. PC 4x3 BUTTON
Use this button to select 4x3 aspect ratio for computer signal.
14. ENT (Enter) BUTTON
Press this button to show the next menu (For example, from main menu to sub-menu). It is also used when [ENTER] is displayed against
an item on the menu screen, or to choose the “Reset” option etc.
15. VIDEO BUTTON
Press this button to select VIDEO (composite video) as the source.
16. S-VID (S-Video) BUTTON
Press this button to select S-Video input.
17. COMP (Component) BUTTON
Press this button to select Component SD (480i/576i) input.
18. RGB1 BUTTON
Press this button to select RGB1 input.
19. RGB2 BUTTON
Press this button to select RGB2 input.
20. DVI BUTTON
Press this button to select DVI signal input.
21. V-KEY+ / V-KEY-
Use these buttons to adjust the vertical trapezoidal distortion of the image projected on the screen.
22. H-KEY+ / H-KEY-
Use these buttons to adjust the horizontal trapezoidal distortion of the image projected on the screen.
23. AUTO ADJ (Adjust) BUTTON
Use this button to automatically adjust the projected image’s (i) horizontal and vertical position, (ii) width and display area, etc.
During alignment, the message “AUTO ADJ...” appears on the screen and disappears when alignment is complete.
• The Quick Alignment function only works when the signal is input from either the [RGB1] or [RGB2] terminal. It does not work when
the signal is input from the [VIDEO] input terminal or the [Y/C] input terminal.
• When input signal from [RGB3] input terminal is received, “AUTO ADJ...” is displayed but it is not functional.
24. KEY RESET BUTTON
This [RESET] button only works as a reset button for the [SVC], [V-KEY] and [H-KEY] adjustments done on the control panel and the
[SVC], [V-KEY], and [H-KEY] adjustments done on the remote control. When adjusting the volume, keystone or digital zoom (when
the setting is displayed on the screen) the adjusted value is reset to that which was set when the projector was shipped from the factory.
This button does not work for the menu (submenu) items.