Filter
Top Products
27
BASIC OPERATION
Notes
• The range where the trapezoidal distortion can
be rectified is 30° vertically and 10° horizontally
with respect to the projector screen. However, when
both are rendered together, the range of effective
rectification will be narrower.
• The picture quality may deteriorate when performing
KEYSTONE compensation. It is recommended to
place the projector perpendicularly to the screen.
• Depending on the signal inputted, the keystone
adjustment range may narrow or parts of the image
may disappear. This is not a malfunction.
• Interference patterns may appear on the screen when
adjusting the keystone. This is not a malfunction.
• To restore the original set value, press the [RESET]
button when adjusting the [V-KEY] and [H-KEY].
(Adjusted value: 0)
Notes
• The Auto Adjust function only works when
computer signals are input into either the [RGB1]
or [RGB2] input terminal.
• It does not work when signals are input
via a [VIDEO IN] terminal (The [VIDEO]
or [Y/C] input terminal).
• When input signal from [RGB3] input
terminal is received, “AUTO ADJ...” is
displayed but it is not functional.
• The Auto Adjust function.
• This automatically adjusts “H-Shift”,
“V-Shift”, “Phase”, “Tracking”, etc.
• Using the Auto Adjust function for automatic
adjustments.
• Please use with bright still-pictures. This
function may not work correctly on a dark
picture or a motion-video.
If adjustment with the Auto Adjust function
is not satisfactory, adjust “H-Shift” and
“V-Shift”, “Phase” and “Tracking”
individually.