Filter
Top Products
32
ADJUSTMENT AND SETTINGS USING MENUS
» The Procedure for Menu Operation
1. Press the [MENU] button
The main menu is displayed on the screen.
2. Press the cursor buttons (▲/▼) to select a main menu item.
• The content of the selected item is displayed on the right side of the screen.
• When “Signal Info” is chosen, the image input or PC input information (whichever is currently selected) is displayed on the right of
the menu.
• When “Language” is selected, you can set the language. → Proceed to Procedure 6.
3. Press [ENTER] or cursor (►) to conrm the menu item.
• The menu indicated differs according to whether Video input or PC input is selected, or when there is no image signal inputted.
For details, please see ‘The Menu Conguration’ on the next page.
4. Press the cursor buttons (▲/▼) to select an adjustment item.
• Adjustment item names displayed in pale cannot be selected.
5. Press the cursor buttons (◄/►) to change the setting value.
• Adjustment item names displayed in pale cannot be selected.
6. To exit after the adjustment, press the [EXIT] button
• Each time you press the button, the menu returns to the previous one.
7. Repeat procedures 2 to 6 to set other items.
After all adjustments are done, press the [MENU] button.
The menu will disappear from the screen.
The icon of the selected menu item will be highlighted.
The menu item currently selected is displayed.
E.g. Main menu when video input is selected: “PICTURE ADJ”
E.g. “IMAGE OPTIONS” menu when video input is selected E.g. “IMAGE OPTIONS” menu when PC input is selected
Alternatively, press [ENTER].
• When the item in the image adjustment menu against which
[ENTER] is indicated is selected, either it will shift to the Image
Options screen or the item command will be executed.