Filter
Top Products
Installation
Vidikron PlasmaView Owner’s Operating Manual 13
PRE
L
IMINAR
Y
3.2
Quick Setup
Table 3-1 gives a quick overview of the PlasmaView installation process. The sections
following this one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1 Mount the PlasmaView on a wall or table stand 14
2 Connect signal sources to the PlasmaView 16
3 Connect external controller to RS-232 port (optional) 18
4 Apply power to the PlasmaView 21
5 Change the OSD language, if desired 21
6 If using the PlasmaView with a PC, adjust PC display
properties
22
7 Display calibration: adjust the following for each input,
starting with Component (DVD/HD1 and/or DVD/HD2); save
settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
25 through 31
8 Configure audio inputs 32
Note