Filter
Top Products
Installation
16 Vidikron PlasmaView Owner’s Operating Manual
PRE
L
IMINAR
Y
3.4
Connections to the
PlasmaView
Proceed as follows to connect the PlasmaView to your video sources, external controller(s) --
if present -- and AC power.
When connecting your equipment:
• Turn off all equipment before making any connections.
• Use the correct signal cables for each source.
• Ensure that the cables are securely connected. Tighten the thumbscrews on connectors
that have them.
• Use the left audio input when connecting mono audio sources.
Connecting the PlasmaView
to Source
Components
Connect your video sources to the PlasmaView as shown in Figure 3-3 and described in the
sections that follow.
Figure 3-3. PlasmaView Connection Diagram
➤
VCR or Laser Disc Player
VIDEO 1 / VIDEO 2
AUDIO 1 L/R
AUDIO 2 L/R
PC/RGB
EXTERNAL CONTROL (RS-232)
REMOTE IN
REMOTE OUT
DVD/HD1
DVD/HD2
DVD Player
IBM VGA or
Compatibles
Monitor adapter for Macintosh
Macintosh or Compatibles
(Desktop type)
HD Set Top Box or DVD Player
with HDMI or DVI Output
PC or
Automation/Control
System
Wired Remote Control
Wired IR Input of
Other Equipment
AUDIO 3 L/R