Filter
Top Products
Operation
34 Vidikron PlasmaView Owner’s Operating Manual
PRE
L
IMINAR
Y
H Size: Use the up- or down-arrow buttons ( , ) to highlight H Size. Then, use the
right-arrow button ( ) to increase the width; use the left-arrow button ( ) to decrease it.
Computer (available only on PC/RGB Input): To have the PlasmaView automatically adjust
the size, position, and quality of RGB computer images, select Computer from the Image
Options menu and set it to ON. To make these adjustments manually, set Computer to OFF.
Fine Picture (available only on PC/RGB Input): Use the Fine Picture control to reduce or
eliminate flickering in the image.
Picture Adjust (available only on PC/RGB Input): Use the Picture Adjust control to remove
striped patterns from the displayed image.
Install
Language: Refer to Changing the OSD Language on page 21.
DVD/HD1 Input: Select DVD/HD1 Input from the Install menu to specify the signal format on
the DVD/HD1 input. Currently, the only option is COMPONENT.
D-SUB Type: Select D-SUB TYPE from the Install menu to specify the signal format on the
PC/RGB input. Currently, the only option is RGB.
HD Type: Select HD Type from the Install menu to specify the resolution (number of vertical
lines) of the incoming high definition signal, if necessary.
• Choose 1080i for standard digital broadcasts.
• Choose 1035i for Japanese “High Vision” TV broadcasts.
• Choose 540p for compatibility with certain HDTV receivers.
These are the only resolutions that the PlasmaView does not detect automatically.
RGB Type: RGB Type refers to the incoming RGB signal type. Currently, the only option is
AUTO.
HDMI: Select HDMI from the Install menu to adjust the black level of the displayed HDMI
signal. Set it to LOW if blacks appear elevated (dark gray). If blacks appear “crushed” (too
dark), set it to HIGH.
Fine Picture and Picture Adjust are adjustable only when Computer is set
to OFF.
Note
➤
LANGUAGE : ENGLISH
DVD/HD1 INPUT : COMPONENT
D-SUB TYPE : RGB
HD TYPE : 1080i
RGB TYPE : AUTO
HDMI : LOW
COLOR SYSTEM : 3.58 NTSC
BLANK AREA : GRAY
SIDEBAR LEV. : 3
S1/S2 : ON
DISPLAY OSD : ON
OSD ADJUST : 3
ID REMOTE : 1
FACTORY : ON
INSTALL
SEL. ADJ. RETURN
EXIT
You must set the Advanced OSD option (in the Function menu) to ON in
order to see all of the items in the Install menu. If you do not, only the
Language and Factory menu items are available. Refer to
Advanced
OSD on page 38.
Note