Filter
Top Products
Operation
Vidikron PlasmaView Owner’s Operating Manual 23
PRE
L
IMINAR
Y
4.4
Using the On-Screen
Menus
To use the on-screen menus:
1. Press MENU to display the Main Menu.
2. To select a menu item, use the up- or down-arrow buttons ( , ) on the remote
control to highlight it.
3. Press MENU to access that menu.
4. Use the up- or down-arrow buttons ( , ) to select the setting you want to change.
Then, press MENU.
5. Press the right- or left-arrow button ( , ) to change that setting. (If you do not do this
within five seconds, the slidebar disappears.)
6. To return to the previous menu, press EXIT. If the Main Menu is on-screen, pressing EXIT
hides the OSD menu.
The PlasmaView OSD menus are arranged hierarchically, as shown in Figure 4-2. Depending
on the selected input source and signal characteristics, some menu options may not be
available.
1. The native resolution of the VP-50 and VP-60 is 1365 x 768; the native
resolution of the VP-42HD is 1024 x 768. Other horizontal or vertical
resolutions may be scaled upward or downward to fit the display.
2. With most computers, you can get the best picture at
1024 x 768 @ 60Hz.
3. The PlasmaView supports 36-bit color (68.7 billion possible colors).
To prevent image retention (burn-in) on your display, ALWAYS use a
screen saver and set it to the shortest possible time.
Note
WARNING