Filter
Top Products
STEP 2: CONNECT THE SCANNER 7
13. When you see this Connect Scanner window, do NOT click Finish.
Leave the window open and proceed to the next section, “Step 2:
Connect the Scanner”.
STEP 2: CONNECT THE SCANNER
Your OneTouch 7300 scanner connects to any available USB 1.1 or
USB 2.0 port. Check your computer’s user guide for port locations.
To connect the scanner to a USB 1.1 or USB 2.0 port:
1. Plug the scanner end of the USB cable into the USB port on the
scanner.
Note: You do not have to shut off the power to your computer when
connecting the scanner to a USB port. If you are connecting your
scanner to a USB Hub, the Hub must have its own power supply so
the scanner can draw power from it.
Computer Plug Scanner Plug
USB Port