Filter
Top Products
30 VISIONEER ONETOUCH 7300 USB SCANNER INSTALLATION GUIDE
3. From the Select Configuration list, select a scanning configuration
for the button.
The configurations are preset for the application you select in the
Select Application list. If you select another application, the
configurations are for that application.
4. Select one of the Format and Page(s) options.
5. Click OK.
Now when you press the scanner button, it scans the image using
the new configuration settings and displays the scanned image in
the new destination application.
CREATING NEW CONFIGURATIONS
You cannot change settings of the preset (default) configurations. If you
want to scan with settings other than those in the preset configurations,
create a new configuration. You can do this either by copying a preset
configuration and making the desired changes or by creating a new
configuration from scratch. The new configuration is saved in the Select
Configuration list so you can use it again.
To create a new configuration:
1. Open the Configuration dialog box.
2. Select the tab that corresponds to the button for which you are
creating the new configuration.
3. Scroll the applications in the Select Destination list and click an
application to associate the new configuration with.
Note: If you want to scan using the Visioneer Scan Manager Pro,
click the option, Configure before Scan. Now when you press the
selected scanner button, the Visioneer Scan Manager Pro opens first
and you can use it to scan.