Filter
Top Products
To Switch Plugs, or initiate a Boot Cycle, proceed as follows:
1. Switch Plug(s) On: To power-on a plug, type /ON n and
press [Enter]. Where "n" is the number or name of the
desired plug or "zone." For example:
/ON 1 or /ON ROUTER
2. Switch Plug(s) Off: To power-off a plug, type /OFF n and
press [Enter]. Where "n" is the number or name of the
desired plug or "zone." Note that the "/OFF" command can
also be entered as "/OF". For example:
/OFF 2 or /OF ROUTER
3. Boot Plug(s): To initiate a Boot cycle, type /BOOT n and
press [Enter]. Where "n" is a the number or name of the
desired plug or "zone." Note that the "/BOOT" command can
also be entered as "/BO". For example:
/BOOT 1 or /BO ATMSWTCH
4. Suppress Command Confirmation Prompt: To execute a
Boot/On/Off command without displaying the "Sure?"
prompt, include the ",Y" option in the command line. The
",Y" option is entered immediately following the command
argument. For example:
/ON ROUTER,Y or /BOOT 2,Y
Figure 6.3: The IPS-15 Help Screen - Text Interface