Filter
Top Products
Æ
Plug Indicator and Manual Control Button: An On/Off
Indicator and Manual Control Button for the Master Unit's
switched plug. To manually switch the plug "On" or "Off",
press and hold the control button for one second.
Note: If desired, the Manual Control Button can also
be disabled, set to control only the plug on the Master
Unit, or set to control the Master Unit plus all
connected Satellite Units as described in Section 5.3.1.
2.1.2. Master Unit Back Panel
The Back Panel of the IPS-15 Master Unit includes a master power
switch, the switched AC outlet, a power inlet, and a circuit breaker
as described below.
À
Master Power Switch: This switch must be "On" in order for
the IPS-15 to function. Note that this switch is not used to set
the On/Off status of the switched outlets.
Á
Switched AC Outlet: A 115 VAC outlet, that can switch up
to 15 Amps. If more than one switched outlet is required,
optional IPS-15 Satellite Units can be easily added to provide
control of up to 17 outlets.
Â
Power Inlet: A 115 VAC inlet that supplies power for the
IPS's command functions and the switched plug.
Ã
Circuit Breaker: 115 VAC, 15 Amps.
Figure 2.2: IPS-15 Master Unit - Back Panel