Filter
Top Products
The Pen Applications
25
Scan to PC
The Scan to PC Functions
Scan to PC is used to scan text and send it directly to the
PC. Text can be scanned into any file or application on the
PC that has a blinking cursor.
The WizCom Desktop must be running and active on the PC
screen. If there is no Scan to PC compatible application
open on screen, the text will still be sent from the Pen, but
will not be accessible on the PC.
For a step-by-step guide to using Scan to PC, see the
Scan
to PC Tutorial
on page 27.
Scanning Modes
Scan to PC has two scanning modes:
Auto Send
When this option is selected in the Scan to PC toolbar
settings menu, any text that is scanned is sent directly into
an open file on the PC that has a blinking cursor.
Non-Auto Send
When the Auto Send option in the Scan to PC toolbar
settings menu is disabled, Scan to PC changes to non-
Auto Send mode. Scanned text is shown on the screen,
and the user can choose whether to send the text or not.
When text is scanned, the Send option is highlighted on the
toolbar. The user can either send the scanned text, or erase
the scanned text by scanning again.