Filter
Top Products
56 Appendix A
Step 2: Direct the Thin Client to the Server
After you set up the folder structure and populate it with the correct files, you must then
direct the thin client to the location of the server by one of the following ways:
• DHCP (see "Using DHCP")
• Manual direction (see "Manually Configuring the Server Location")
IMPORTANT: Using DHCP is strongly recommended.
Using DHCP
When using DHCP to direct the thin client to the location of the server (recommended),
information about the server and root directory is obtained from the following DHCP
options:
• 161 - The server.
• 162 - Root path to the server (ftp/http/https).
· If no root path is defined, /wyse is assumed.
· If a root path is defined, the additional path will be appended to the URL supplied by
option 161.
• 184 - (Optional) Server username (to server specified in option 161).
• 185 - (Optional) Server password (to server specified in option 161).
TIP: Check-in for configuration changes is done early in the boot process. For that reason,
changes in DHCP information may not be propagated to a unit until a full boot is
completed. However, you can avoid this by forcing a renewing of the DHCP lease, which
makes sure that the unit has the latest file-server location before the next check. Simply,
right-click the Network Manager icon, click Enable Networking to disable it, right-click
the Wireless Manager icon, and then click Enable Networking to enable it again (the
DHCP lease is renewed).
TIP: For general instructions on adding DHCP Options #161 and #162, refer to Wyse
Knowledge Base Solution #16132 (go to the Wyse Knowledge Base at
http://www.wyse.com/kb
and search for 16132).
Use the guidelines shown in Table 3 when creating and adding the DHCP options you
need.
Table 3 DHCP Option Tags
Option Description Notes
1 Client identifier Always sent.
2 Time Offset Optional.
3 Router Optional but recommended. It is not required
unless the thin client must interact with servers
on a different subnet.
6 Domain Name Server
(DNS)
Optional but recommended.
12 Host Name/Terminal
Name
Optional string. The host name or terminal name
to be set.
15 Domain Name Optional but recommended. See Option 6.
28 Broadcast Address Optional.