Filter
Top Products
Operating AC Appliances
16
inverter’s safety overload shutdown circuit. See
“Troubleshooting Reference” on page 36 for the reset
procedure.
Trouble Appliances
Some appliances may be damaged if they are connected to
the XPower Powerpack. See “Precautions for Using
Rechargeable Appliances” on page viii.
Operating Several Appliances at Once
You can run several AC appliances if the total rating of all the
appliances (in watts) does not exceed 250 watts. You can run
appliances using an AC power bar.
Run time, however, will decrease accordingly with the
number of appliances being operated and the AC power being
consumed.
Operating an AC Appliance
Before operating your AC appliance, ensure that the battery
of the XPower Powerpack is fully charged. See “Recharging
with the AC Charger” on page 13 for details.
To operate an AC appliance:
1. Open the protective covering on the right side of the
XPower Powerpack. Turn the AC Outlet On/Off switch
to the On position.
The switch illuminates to indicate AC power is available
at the AC Outlet.
2. Plug the AC appliance into the AC Outlet and turn the
appliance on. XPower Powerpack will operate most
devices rated up to 250 watts.
3. Recharge the XPower Powerpack as soon as possible
after each use.