Xantrex Technology 300 PLUS Power Supply User Manual


 
Recharging the XPower Powerpack Battery
29
Recharging with a Generator’s Regulated 12 Volt DC
Outlet
Refer to the Owner’s Guide accompanying your generator for
detailed instructions on connecting the generator to a unit like
the XPower Powerpack.
You can recharge the battery of the XPower Powerpack using
a generator in several ways:
Using the AC Charger to recharge the XPower
Powerpack from a generator is possible, but would
require extended generator running time.
Using a generator which has an auxiliary regulated 12
volt DC output designed for charging 12 volt batteries.
Most generators are equipped with them. Use this power
source for faster charging.
Using a generator with a lighter socket for its 12 volt
output. Follow the connection instructions in
“Recharging with the DC Charging Cable” on page 28.
Most of the XPower Powerpack’s battery capacity will be
recharged in a few hours.
Note: Battery Level indicators are only accurate when the
XPower Powerpack has been disconnected from all
appliances and all charging sources for fifteen minutes.
Important: Do not leave the XPower Powerpack
permanently connected to the vehicle’s lighter socket or
12 volt accessory outlet.
CAUTION
The generator output must be intended for battery
charging and have an output of 15 volts or less. An
unregulated output or one that exceeds 15 volts DC can
damage the battery.