Xantrex Technology 300 PLUS Power Supply User Manual


 
Replacing the Fluorescent Tubes
34
6. Do not overtighten the nut and bolt. Consult the battery
manufacturer for torque specifications.
7. On the XPower Powerpack 300, replace the battery cover
and the four fasteners.
On the XPower Powerpack 300 Plus, replace the
compressor unit and the four fasteners.
8. Dispose of the old battery in an environmentally
responsible manner.
Replacing the Fluorescent Tubes
To replace a fluorescent tube:
1. Turn the light switch off.
2. Remove the clear cover by grasping it on each side at the
top and pulling the top of the cover away from the unit.
3. Gently grasp the fluorescent tube and rotate ¼ turn to
remove it.
4. Insert the replacement tube and rotate ¼ turn to lock the
tube in place.
5. Reattach the clear cover.
Replacing the External Fuse
The replacement fuse is a 40 amp 32 VDC car fuse which can
be purchased at any automotive shop. To replace the external
fuse:
1. Open the protective cover on the right side of the unit.
2. Remove the fuse.
3. Insert the replacement fuse. Ensure the replacement fuse
is rated at 40 amps.